Constitutive Modeling of Slurry Infiltrated Fiber Concrete (SIFCON)
Slurry Infiltrated Fiber CONcrete (SIFCON) is a unique material, containing 5 to 18 percent, by volume, of steel fibers; in contrast, standard Fiber Reinforced Concrete (FRC) usually contains...
Optimization of Discontinuous Fiber Composites
Discontinuous Random Fiber Reinforced Composites (DRFRC) exhibit different behaviors depending on their microstructural properties. Small fraction of fiber rupture can have a beneficial...
Determination of Interfacial Shear and Normal Stresses in Fiber Pull-Out
In this paper we present an improved formulation for the pullout problem, wherein both the effects of fiber end condition and interfacial and frictional shear stresses are considered....
Microcrack Interaction Toughening in Ceramics and CMCs
The generation of microcracks, which causes an extension of the damage zone at values of stress intensity factor, K, below the expected critical level represented by KIC...
An Elasticity Solution for a Transversely Isotropic Material Containing a Spherical Shell Under Arbitrary Axisymmetric Loading
A three-dimensional elasticity solution is obtained for a transversely isotropic solid containing an isotropic spherical membrane shell. Perfect bonding is assumed between the shell and...
Investigation of Parametrically-Induced Excitation in Concrete Columns
A mathematical model is developed which accounts for the non-linear material characteristic of concrete members. The axial and transverse motions of concrete columns, are found to be second-order...
Thermal Load for p-Version Laminated Elements
A p-version finite element formulation is presented for determining temperature stresses in laminated composite axisymmetric problems. Formulation for a rectangular axisymmetric p-version...
Numerical and Experimental Studies of Vibration of Impact Damaged SMC Composite Plates
This paper presents a parametric finite element study and an experimental investigation to free vibration of clamped, circular short-fiber reinforced composite plates with various degrees...
Stresses in Open Section Fiber Reinforced Composite Beams Under Constant Shear Loading
A strength of materials approach from the ply level is used to derive expressions for stresses in statically determinate open section composite beams subjected to constant shear loading....
Macromodeling of Complex Composites
Dimensionally reduced p-version finite elements based on higher order theory are developed for modeling laminated composite plates and shells in the presence of cracks, notches, and delaminations....
An Analysis of an Inflatable Module for Planetary Surfaces
Design and construction of a structure on planetary surfaces requires addressing a host of issues not encountered on Earth. A modular quilted inflatable structure consisting of thin membranes...
Structural Materials from Lunar Simulants Through Thermal Liquefaction
Thermal liquefaction that allows development of intermediate ceramic composites from a lunar simulant with various admixtures is used to develop structural materials for construction on...
Transient Analysis of Flexible Space Structures
A new approach for numerical analysis of flexible space frames subjected to impact forces is presented. The method is particularly effective in the analysis of large amplitude vibration...
The Effect of Multiple Compliant Layers at the Fiber-Matrix Interface on Residual Thermal Stresses in Metal Matrix Composites
The large mismatch in thermoelastic properties of the fiber and matrix phases in advanced metal matrix composites, coupled with high consolidation temperatures, produces severe residual...
Measuring Vibration in an Advanced Composite Beam with Localized Internal Fiber-Optic Strain Sensors
Two optical fibers embedded with different configurations were used separately as strain sensors to measure the natural frequencies and modal amplitudes of a cantilevered graphite/bismaleimide...
The Analysis Related to the Impact of Composite Panels
In analyzing experiments under impact loading, a dynamic model is needed to solve for the deflections and strains as functions of time. For composites, where shear deformation can be very...
Composite Materials for Structures on Planetary Surfaces
Development of structures for planetary surface environments depends upon the use of the most appropriate materials. Advanced composite materials are apparently the best candidates for...
Comparison of Micromechanical Models for Elastic Properties
The effective elastic properties for unidirectional composites, as predicted by several analytical micromechanical models are compared for glass/epoxy and graphite/epoxy. A brief review...
Optimum Design of Laminated Composites
The increased demand for high strength, light weight materials that function successfully in high temperature environments has caused the effective development of laminated composites...
Combustion Synthesis of Advanced Materials
The combustion synthesis of ceramic-metal composites using an in-situ liquid infiltration technique is described. The effect of varying the reactants and their stoichiometry to provide...
Return to search